// This is a Mup input file template.
// Lines starting with // are "comments" that are here for your benefit.
// You can remove them without affecting the output.

// // // // // Macro definitions

// For F/D parts, define the following to get both staffs:
// define FIFE 1: @
// define DRUM 2: @
//
// Otherwise, just define one:

define DRUM 1: @
define BASS 2: @

// For drum rudiments, define the "extra notes" and some commonly used
// constructs.  Note for flam/ruff, these macros define just the grace
// notes, not the basic stroke.  The 7-stroke roll is an eigth note construct.
// All require the terminating semicolon when used.

define FLAM [pad 2;grace]8e slur @
define RUFF [pad 2;grace]8e;[grace] slur @
define ROLL7 [slash 2; with " ","7"] 8e slur @

/////////////////////////////////////////////////////////////////////////
//		things to go on the top of the first page
header

	//		 centered title.
	// The number in parentheses is the text point size.
	// Make it bigger if you want a bigger title or smaller if you
	// want a smaller title

	// title (18) "Replace this with the title of your song"

	title (18) "Army 2/4 Standard Beat"

	//		subtitle
	// If you want a subtitle, remove the // from the beginning
	// of the next line and fill in the appropriate subtitle text
	// title (14) "Replace this with the subtitle"

	//		composer info
	// The first pair of double quotes enclose what to left justify,
	// the second encloses what to right justify.
	// If you want more than one line, add similar lines of input
	// title   ""   "Replace this with composer info"
	// title palatino ital (12) "left side" "right side"

	title palatino ital (12) "Bruce & Emmett" ""


/////////////////////////////////////////////////////////////////////////
//		things to go on the bottom on the first page
footer
	// If you want a copyright notice, remove the //
	// from the next line and edit in the appropriate information
	// title "\(copyright) Copyright  Replace this with year and name"
	// title (12) " "	// put out a blank line
	// title (11) "left" "center" "right"


/////////////////////////////////////////////////////////////////////////
//		things to go on the top of pages other than the first
header2
	// This example will give a centered page number between dashes.
	// You can customize as you wish.
	title "- \% -"


/////////////////////////////////////////////////////////////////////////
//		things to go at the bottom of pages other than the first
footer2
	// if you want things printed at the bottom of pages of than
	// the first page, place them here


/////////////////////////////////////////////////////////////////////////
//		score-wide parameters
//
// You may or may not need to change some items in this section
//
// The values given as examples are the default values that Mup uses
// if you don't specify anything for them
score
	//	time signature. Can be cut, com,
	//	or two numbers with a /	between them
	time = 2/4

	//	key signature. Value is a number from 0 to 7
	//	followed by # or & for number of sharps or flats.
	key = 0#

	//	how many staffs. Can be a number from 1 to 40
	staffs = 2

	//	clef. Can be treble, treble8, frenchviolin,
	//	soprano, mezzosoprano, alto, tenor, baritone, or bass
	clef = treble

	// "beam" each quarter's worth together, breaking on the
	// half-way point for the measure.
	beamstyle = 4,4

	// set the default octave to be one above normal
	defoct = 5

	staffsep = 9
	scale = 0.75

/////////////////////////////////////////////////////////////////////////
//	You can set some parameters for specific staffs,
//	to override the score-wide parameters. For example,
//	if you specify staffs = 2 in the score-wide parameters above,
//	and want to use bass clef on staff 2, even though the score-wide
//	clef parameter is set to treble, you can do
//		staff 2
//			clef = bass


/////////////////////////////////////////////////////////////////////////
//		music input starts here
music


// For each measure, you enter one line of input for each staff,
// then indicate what kind of barline to print.
// The following specifies that staff 1 contains a measure of rest
// and that an ordinary bar line is to be used at the end of the measure.

// 1: mr;
// bar

// Usually, a measure of input for one staff consists of one or more chords
// Each chord is specified by
//	time_value notes ;
// where time_value is something like
//	4	for a quarter note
//	8	for an eighth note
//	4.	for a dotted-quarter note
// etc and notes is a list of one or more notes, specified as a pitch from
// a to g, optionally followed by an accidental (#, &, x, &&, or n for sharp,
// flat, double sharp, double flat, or natural respectively).
// Examples:
//	4c;
//	2. ceg;
//	16 f#;
//	1 d b&;
// (Spaces are optional, you can put them in if you want, but don't have to)
//
// So a complete measure might look something like:
//	1: 4e; 4d; 2c;
//	bar
//
// If you want a note in a different octave than the default octave
// (the octave from middle-C up for treble clef,
// or the octave below middle-C for bass clef),
// you can add a + for each octave to go up or - for each octave to go down.
// For example:
//	1: c+; gc+e+; a&-; f#---;
//
// There are many other things you can specify, such as ties, slurs, grace
// notes, etc, and there are also many shortcuts you can use to save typing.
// Consult the Mup documentation for more details.

// Other bar types you may want to use are
//	repeatstart
//	repeatend
//	repeatboth
//	dblbar
//	endbar
//	invisbar

//rom above 1: 6 "7";
DRUM 4s;8s; ROLL7;
BASS 4s;4s;
bar
DRUM 8e; ROLL7; 8e; FLAM; 8e;
BASS 8e; 8r; 8e; 8e;
bar
DRUM FLAM; [with >]16e; [with >]16e; 16e; 16e; FLAM; [with >]8e; ROLL7;
BASS [with >]16e; [with >]16e; 16e; 16e;  [with >]8e; 8r;
bar
DRUM 8e; FLAM; 8e; FLAM; [with >]16e;[with >]16e;;; 
BASS 8e;; [with >]16e;[with >];;;
bar
DRUM FLAM; 8e; FLAM; 8e; FLAM; [with >]16e;[with >]16e;;; 
BASS 8e;; [with >]16e;[with >];;;
bar
DRUM FLAM; 8e; ROLL7; 8e; FLAM; 8e;
BASS 8e; 8r; 8e; 8e;
bar
DRUM FLAM; [with >]16e;[with >]16e; ;; FLAM; 8e; FLAM; 8e;
BASS [with >]16e;[with >]; 16e;; 8e;;
bar
DRUM FLAM; 8e; ROLL7; 8e; ROLL7;
BASS 8e; 8r; 8e; 8r;
bar 
DRUM 8e; FLAM; 8e; FLAM; 8e; 8s;
BASS 8e;;; 8s;
repeatend
newscore
DRUM 2s;
BASS 2s;
repeatstart
DRUM 4s; 8s; FLAM; 8e; 
BASS 4s; 8s; 8e; 
bar
DRUM FLAM; 8e; [slash 2; with " ","15"] 4.e slur;
BASS 8e; 8r; 4r;
bar
DRUM 8e; [slash 2; with " ","15"] 4.e slur;
BASS 8e; 8r; 4r;
bar
DRUM 8e; FLAM; 8e; FLAM; [with >]16e;[with >]16e;;; 
BASS 8e;; [with >]16e;[with >];;;
bar
DRUM FLAM; 8e; FLAM; 8e; FLAM; [with >]16e;[with >]16e;;; 
BASS 8e;; [with >]16e;[with >];;;
bar
DRUM FLAM; 8e; ROLL7; 8e; FLAM; 8e;
BASS 8e; 8r; 8e;;
bar
DRUM FLAM; [with >]16e;[with >]16e; ;; FLAM; 8e; FLAM; 8e;
BASS [with >]16e;[with >]; 16e;; 8e;;
bar
DRUM FLAM; 8e; ROLL7; 8e; ROLL7;
BASS 8e; 8r; 8e; 8r;
bar 
DRUM 8e; FLAM; 8e; FLAM; 8e; 8s;
BASS 8e;;; 8r;
endbar